How To Use; Resistance Measurement; Continuity Testing - Steren MUL-030 Manual De Instrucciones

HOW TO USE

RESISTANCE MEASUREMENT

1.
Slide the selector to the
2.
Press the FUNC button until the
3.
Touch the component with the tips. The reading will automatically appear on
the screen.
When measuring the SMD device on the PCB, you must disconnect the
power and discharge all the high voltage capacitors.
7
position.
symbol appears on the screen.

CONTINUITY TESTING

1.
Slide the selector to the
2.
Press the FUNC button until the
3.
Put the the test tips on the component. When the detected resistance
is less than 10 ~ 60 Ω, a 2 kHz sound (beep) is generated to indicate
continuity.
position.
symbol appears on the screen.