Unit Stand Assembly - auna Julie Ann Manual Del Usuario

UNIT STAND ASSEMBLY

1. Take out the unit and the stands, put them on a smooth surface.
2. Disassemble the plastic parts(as the fig)
by removing the screws.
You may choose to put the unit on to the table surface with the plastics
parts to avoid damage the table.
3. Repeat to disassemble all o f the 4 pcs..
nsert the wooden stand into the hole
and tighten the screws.(Use the same
screws of the disassembled the plas-
tic part)
If there is imbalance after the installa-
tion, remove the short legs and put 1
or 2 EVA pads to adjust the unit to be
put well.
EN
27