Littium Berlin Manual Del Usuario Y Garantía página 47

08. Place the front wheel. Before tightening the manual lock of the axle, make sure to remove
the support of the E-Bikes stand to ensure that the front wheel stays securely in place when
holding the total weight of the E-Bike. Then tighten both side screws of the steering post's
base.
09. Connect the front brake.
10. Make sure that all the other nuts, screws and fasteners are well tightened.
11. Check the connection of the engine.
12. Make sure that the brakes and brake levers are working properly.
13. Make sure that the tyre pressure is 60 psi/4.1 bar.
14. Double check that the battery is fully charged. When leaving the factory, the battery is char-
ged at its 50%, but it is important to carry out an initial charge of 4-5 hours before using the
E-Bike for the first time.
15. Two safety keys are supplied with the battery. These keys are unique, so we recommend
keeping one in a safe place or making a copy of it. The battery cannot be removed without
the safety key as it features an anti-theft system.
43