Microlife NEB200 Manual Del Usuario página 21

Table 2
Guidance and manufacturer's declaration - electromagnetic immunity
The device is intended for use in the electromagnetic environment specified below. The customer or
the user of the device should assure that it is used in such an environment
Immunity Test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Surge IEC 61000-
4-5
IEC 60601 Test Compliance level
level
±8 kV contact ±8 kV contact ±15
±15 kV air kV air
Power supply Power supply
lines: ±2 kV lines: ±2 kV
input/output
lines: ±1 kV
line(s) to line(s): line(s) to line(s):
±1 kV. ±1 kV.
line(s) to earth: 100 kHz repeti-
±2 kV. tion frequency
100 kHz repeti-
tion frequency
Electromagnetic environment - guidance
Floors should be wood, concrete or
ceramic tile. If floors are covered with
synthetic material, the relative humidity
should be at least 30 %
Mains power quality should be that of a
typical commercial or hospital environ-
ment.
Mains power quality should be that of a
typical commercial or hospital environ-
ment.
19