Buick Roadmaster 1995-1996
1. Unclip dash panel sides and remove.
(Figure A, 1)
2. Unclip panel below steering column and
remove. (Figure A, 2)
3. Remove (2) 7mm screws above
instrument cluster. (Figure A, 3)
(4)
(2)
(Figure A)
6
DASH DISASSEMBLY
4. Set parking brake, turn car on, and move
shifter to the lowest gear. Tilt steering wheel
down then unsnap entire instrument cluster/
radio panel and remove. (Figure A, 4)
5. Remove (3) 7mm screws to remove radio.
(Figure A, 5)
Continue to Kit Preparation
(3)
(5)
(1)
Buick Skylark 1996-1998
1. Remove (6) 9/32" screws inside glove box.
(Figure A, 1)
2. Under glove box and drivers knee bolster,
remove (2) plastic panels by turning (2)
1/4 turn fasteners per side.
3. Remove (4) 9/32" screws revealed (2 per
side). (Figure A, 3)
(3)
(Figure A)
4. Unsnap panel from driver's side to
passenger's side.
5. Remove (3) 9/32" screws to remove radio.
(Figure A, 5)
Continue to Kit Preparation
(1)
(1)
(3)
(5)
|
1.800.221.0932
MetraOnline.com