Worldcast Systems SOLAR FM Guía Rápida página 11

Fastening the SOLAR FM
Four steps are required to fasten the SOLAR FM to the pole:
1- Set the binding frame on the pole at the desired height with the binding set
adapted to the pole diameter.
Two sets are supplied with the accessories, for Ø 25-50 and Ø 0-90.

The SOLAR FM can be connected to either satellite antenna input.

Use zip ties every 50 cm to fasten the cable to the mast between the SOLAR FM and the solar panels.

Use the provided plastic tape and rubber tape over the connectors to ensure watertigthness.

The optional 2
fastening system is similar.
Please see section 2.2 of this notice for information about setting the transmitter with the mobile
application.
Please read the user manual for more information on the transmitter.
3- Lock the transmitter block on the
frame with the supplied pins.
4- Set the radome over the frame and fasten it with the 2 side
screws.
Install solar panels and antennas according to manufacturer's
instructions.
nd
battery can be set on the same pole either above or below the SOLAR FM. The
2- Insert the transmitter block on the frame
hooks.
English version
11