Cable Connection - Worldcast Systems SOLAR FM Guía Rápida

Cable connection

!
Before turning on the transmitter, make sure the RF output is connected to an antenna or a load
to avoid damaging the product.
 Remove the AC and AF protective caps.
 Connect the antenna (or dummy load) to the cable set on the FM output (marked FM OUT).
 Connect the analog audio inputs to the AF connector and to the audio player (computer,
smartphone, audio equipment, etc) using the supplied test audio cable.
 Connect the mains cable supplied in the SOLAR FM box to the AC input and to the mains (input
voltage: 100 VAC – 300 VAC).
!
Cable CA01050 is a dedicated test cable. Its connectors are not watertight and should therefore not
be used for commissioning.
SOLAR FM configuration using the application
1. WiFi configuration:
The SOLAR FM transmitter control interface requires WiFi access.
A compatible smartphone is supplied, but you may also use your own Android (version Lollipop
minimum) or iOS (version 10 minimum – available 2018) mobile phone.
The free application is available on Google Play and Apple Store.
 Connect to the transmitter WiFi with the smartphone:
o Network name: solarfm_xxxx (xxxx is the transmitter's serial number)
o Password: solaradmin
English version
5