Westinghouse WFVCR310 Instrucciones página 9

Press the operation button (7) to start auto cleaning. Press the operation button (7)
again to stop cleaning.
Using the mobile app to control the robotic vacuum cleaner
Scan the following QR code with your smartphone to download and install the
mobile app. After installing the app, launch the app interface to access in the in-app
functions.
Wi-Fi settings
1. Press the power switch (3) to turn on the main unit (a).
2. Press the operation button (7) for about 5 seconds (or press
control).
• You will hear a sound signal.
3. When the main unit is ready to pair with your Wi-Fi network, open the app
interface on your smartphone and follow the steps to set up Wi-Fi.
Note:
• Once you have successfully paired the main unit for the first time, it will
automatically reconnect to the same Wi-Fi network.
• You can use the smartphone app to control the main unit remotely.
• The smartphone app is available for Android and iOS devices.
WFVCR310_Roboticvacuumcleaner_5L.indd 9
on the remote
EN
9
11/19/2019 3:14:22 PM