Sanus VLT5 Manual Del Usuario página 12

10. Install the bottom two lag bolts . Tighten all four lag bolts only until they are pulled firmly against the wall plate .
13 13
11
NOTE: Hold the wall plate
in place when tightening the first lag bolt to keep the plate from shifting out of place.
11 13
CAUTION:
Improper use could reduce the holding power of the lag bolt . DO NOT over-tighten the lag bolts.
13
11. Slide the covers closed on wall plate .
11
Go to STEP 3 on PAGE 17.
10
11
Cover
11
Cover
11
13
12