Recomendaciones Para La Configuración - EcoxGear EcoSlate GDI-EXSLT800 Manual De Instrucciones

Ocultar thumbs Ver también para EcoSlate GDI-EXSLT800:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Recomendaciones Para
la Configuración 1-2-3
Cargue su EcoSlate
1
Antes de encender su EcoSlate conecte el puerto micro USBcon
el cable USB y a una fuente de alimentación para
cargarcompletamente su EcoSlate para un mejor funcionamiento.
NOTA: Antes de usar su EcoSlate por primera vez, cargue la
unidad hasta que todos los indicadores de nivel de batería brillen
de color verde, indicando una carga completa.
Se requiere aproximadamente 3 horas de carga desde una
cargabaja a una carga llena.
Las opciones de fuentes de alimentación incluyen la conexión
USB a su computadora o a una toma de alimentación usando un
adaptador CA a USB de 5V. Se recomienda que siempre use el
cable USB incluido con su EcoSlate.
Encendiendo, Pila, y Indicadores LED de
2
Estado
Una vez que esté completamente cargado, oprima el botón de
encendido en espera
Usted verá un LED verde y escucharás "Power on" (encendido)
cuando se enciende.
IMPORTANTE: Asegúrese que el interruptor principal, ubicado en el compartimento
trasero debajo de la tapa, está en la posición ON (encendido). Si el interruptor está
en la posiciónOFF (apagado), su EcoSlate no serán capaces de encender con el
botón de encendido en espera.
Los indicadores LED del nivel de la pila están ubicados en la
parte superior del dispositivo. Cada LED representa un 25% de
carga,con 4 LEDs llenos indicando una carga llena.
El tiempo de reproducción de audio vía una conexión Bluetooth
es aproximadamente de 12 horas con 75% de volumen.
Sincronización Bluetooth y Su Audio
3
Conexión vía Bluetooth:
Conecte a su dispositivo inteligente y reproduzca audio
Cuando su EcoSlate esté encendido, el LED azul en el
panel superior destellará, indicando que la unidad está lista
para sincronización.
en la parte superior de su EcoSlate.
of a severe impact to your unit please return the unit to Grace Digital to review for
potential damage.
3) Never open the auxiliary door in a water environment. This could cause water to
ingressinto the unit which could potentially be hazardous and cause a fire or a spark.
4) Never connect a device to the auxiliary input jack when in a water environment. The
auxiliary jack should only be used in a dry environment.
5) Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital
for any assessments and repairs.
CARE, MAINTENANCE, & RECAUTIONS:
1) The unit is waterproof only when the cap is properlyclosed.
2) Close the cap properly before use. If the unit is placed in water without the cap properly
closed, water may enter into the unit and void your warranty.
3) Dry unit completely before opening the cap. Do NOT open the cap if wet or in a
wet environment.
4) Do NOT apply excessive force to any surfaces of the unit when wet or in a
wet environment.
5) Do NOT use or store the unit in places with high temperature.
6) AVOID prolonged exposure to ultraviolet radiation (UV sunlight) and strong
magnetic fields.
7) Periodically check the rubber seal for premature wear.
8) Periodically clean the rubber with a soft moist cloth and ensure no objects such as
dirt, hair, or sand are on the rubber seal ring. Do NOT use any oily solvent or
chemicals for cleaning.
9) Rinse off the unit with tap water after use in salt water or swimming pool.
10) Power and / or charge the built-in rechargeable battery for portable use by connecting
the USB cord to a computer USB connection or to an AC outlet using the AC-to-USB
cord 5V, 1A power adapter intended for use with the unit.
11) Noise and audio distortion may occur when the batteries are nearing end of ccharge.
12) Do NOT remove the built-in battery. Do NOT remove the grill covers.
LIMITED MANUFACTURER'S WARRANTY:
The EcoSlate is covered by a 3 year limited warranty that covers defects in workmanship
and / or materials for a period of 3 years from original purchase date. This warranty does
not apply to any products which have been abused, neglected, modified, or used for a
purpose other than the one for which they were manufactured. Please refer to the above
care and maintenance instructions for suggested care details. The warranty is valid only
for the original owner who purchases the unit from an authorized dealer. Transfers do not
qualify for warranty protection. Grace Digital reserves the right to replace any out-of-
stock or discontinued product with a comparable product. Discontinued products may
not be available for warranty replacement. Any contents are NOT covered by the limited
manufacturer's warranty. Warranty terms may be revised without notification at the
discretion of the manufacturer. Please visit www.ecoxgear.com for additional product &
warranty information.
EcoSlate by ECOXGEAR, a division of Grace Digital Inc., San Diego,
California.
Designed and Engineered in the USA. Made in China.
Patent Pending.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ecoslate gdi-exslt820

Tabla de contenido