Siemens SINUMERIK 840D sl Manual De Puesta En Marcha página 29

3080231
3080232
3080233
3080234
3080235
3080236
//* name of channel-area 6 and names of channels of channel-area 6 */
3080237
3080238
3080239
3080240
3080241
3080242
3080243
3080244
3080245
//* name of channel-area 7 and names of channels of channel-area 7 */
3080246
3080247
3080248
3080249
3080250
3080251
3080252
3080253
3080254
//* name of channel-area 8 and names of channels of channel-area 8 */
3080255
3080256
3080257
3080258
3080259
3080260
3080261
3080262
3080263
En las cadenas de espacios (ver arriba "") puede insertar sus propios textos de usuario, p.
ej., "NCU_1". En cada línea de un pulsador de menú caben ocho caracteres; el salto de
línea se genera con el carácter "%n": p. ej., "NC3Torn%ncanal1".
Puesta en marcha de HMI-Embedded (IM2)
Manual de puesta en marcha, 01/2008, 6FC5397-8CP10-1EA0
"" /2x9 T_CHAN_AREA_5_CHANNEL_3
"" /2x9 T_CHAN_AREA_5_CHANNEL_4
"" /2x9 T_CHAN_AREA_5_CHANNEL_5
"" /2x9 T_CHAN_AREA_5_CHANNEL_6
"" /2x9 T_CHAN_AREA_5_CHANNEL_7
"" /2x9 T_CHAN_AREA_5_CHANNEL_8
"" /2x9 T_CHAN_AREA_6
"" /2x9 T_CHAN_AREA_6_CHANNEL_1
"" /2x9 T_CHAN_AREA_6_CHANNEL_2
"" /2x9 T_CHAN_AREA_6_CHANNEL_3
"" /2x9 T_CHAN_AREA_6_CHANNEL_4
"" /2x9 T_CHAN_AREA_6_CHANNEL_5
"" /2x9 T_CHAN_AREA_6_CHANNEL_6
"" /2x9 T_CHAN_AREA_6_CHANNEL_7
"" /2x9 T_CHAN_AREA_6_CHANNEL_8
"" /2x9 T_CHAN_AREA_7
"" /2x9 T_CHAN_AREA_7_CHANNEL_1
"" /2x9 T_CHAN_AREA_7_CHANNEL_2
"" /2x9 T_CHAN_AREA_7_CHANNEL_3
"" /2x9 T_CHAN_AREA_7_CHANNEL_4
"" /2x9 T_CHAN_AREA_7_CHANNEL_5
"" /2x9 T_CHAN_AREA_7_CHANNEL_6
"" /2x9 T_CHAN_AREA_7_CHANNEL_7
"" /2x9 T_CHAN_AREA_7_CHANNEL_8
"" /2x9 T_CHAN_AREA_8
"" /2x9 T_CHAN_AREA_8CHANNEL_1
"" /2x9 T_CHAN_AREA_8CHANNEL_2
"" /2x9 T_CHAN_AREA_8CHANNEL_3
"" /2x9 T_CHAN_AREA_8CHANNEL_4
"" /2x9 T_CHAN_AREA_8CHANNEL_5
"" /2x9 T_CHAN_AREA_8CHANNEL_6
"" /2x9 T_CHAN_AREA_8CHANNEL_7
"" /2x9 T_CHAN_AREA_8CHANNEL_8
Configuración del sistema HMI
2.4 Configuración de canales
29