INSTALLATION INSTRUCTION
The installation procedure varies with the model (KM-2502B or KM-2002B).
Please make sure you apply the appropriate procedure described on the
following pages.
The following must be noted
Electrical connection
The appliance is fitted with a plug and must only be connected to a properly installed earthed
socket. Only a qualified electrician who takes the appropriate regulations into account
may install the socket or replace the connecting cable. If the plug is no longer accessible
following installation, an all-pole isolating switch must be present on the installation side
with a contact gap of at least 3 mm. Contact protection must be ensured by the installation.
Fitted units
The installation cabinet must not have a back panel behind the appliance. Minimum
installation height: 850 mm.
Ventilation slots and intakes must not be covered.
GB-27
00_KM-2502B_2002B_OM_WEST_PL.indb 27
2017-08-30 11:26:19