DICE D ENERGY Manual De Usuario página 13

CONTENT OF THE PACKAGE
Adhesive for fiber
D·ENERGY 2 Batteries AA 1.5V optic support Fastening Velcro
INSTALLATION
D·ENERGY can be installed in meters where a contractual power up to 45
kW is available.
The metrological LED provides information on the energy consumed by
the user, each ignition corresponds to a consumption in kWh calculated
on the basis of the multiplicative factors [FM] indicated on the installed
meter. The default is 1000 imp / kWh. If the sensitivity of the meter is
different, the user can set the correct value via the mobile app during the
pairing phase. The settable value is between 100 and 10000 pulses / kWh.
SMART. WARNING! During installation, live parts must not be touched.
The device does not work properly in the presence of third party
systems that feed energy into the network (e.g. photovoltaic).
ADVICE! To facilitate the installation of D · ENERGY, it is advisable to
switch on an appliance that increases consumption so that the frequency
of flashing of the led on the meter is high enough.
IMPORTANT! Only one D·ENERGY can be associated with a DiCE SMART.