Note: D · ENERGY is able to self-adapt and increase the transmission
power in case of long distances or barriers that hinder the transmission
of the signal. An increase in signal transmission power affects battery life.
BATTERY CHANGE
To change the batteries, follow the procedure below:
1. Unscrew the upper part of the D · ENERGY anticlockwise;
2. Remove the supplied batteries;
3. Hold down the pairing button for 2 seconds;
4. Insert the new batteries (rechargeable batteries can also be used);
5. The signaling LED will emit a long blink (about 1 sec).
RADIO RANGE
D·ENERGY uses a low frequency "long range" transmission protocol, which
means that it is able to cover large distances and overcome architectural
barriers such as walls, doors, reinforced concrete. Like any wireless device,
the range of the signal has a limit and is influenced by many factors that
vary from place to place, so it is very difficult to give a correct estimate.
If D · ENERGY is positioned perpendicular to the DiCE SMART, the
transmission performances improve considerably. On the contrary, if the
signal has to travel a long distance diagonally, crossing many walls, it will
stop sooner. Based on our experience and tests carried out at different
types of structures, the maximum distance covered is 6 floors.
FIRMWARE UPDATE