DICE D ENERGY Manual De Usuario página 15

• To start the JOIN phase, long press the pairing button inside the D
· ENERGY for 5 seconds. Upon release, the signaling LED will flash
until the association is complete;
• During pairing, the DiCE SMART will slowly flash yellow (Energy co-
lor family) indicating that the pairing procedure is in progress;
• Once the connection is established, the DiCE SMART will turn yel-
low (Energy color family). After 1 minute, the D·ENERGY will begin
to communicate the power values that will be represented on the
DiCE SMART following the chromatic scale of the reference family
(Energy);
• In case of loss of communication between the two devices, DiCE
SMART will return to flashing slowly yellow (signal provided to the
user when the DiCE SMART is in the consumption section).
STEP 2: INSTALLATION ON THE METER
• Place the circular velcro on the back of D · ENERGY;