Belkin F5U203ea Guia Del Usuario página 7

6. Once the data transfer is complete, the source and target LED will stop pulsing and the LED
in the shape of a checkmark ( ) will light up green.
Data transmission errors
If the LED in the shape of a checkmark ( ) turns red during copying, this means that a data
transmission error has occurred. The copy was not successful. To continue, please carry out
the following:
1. Press the reset button.
2. Check if the target device has sufficient unused memory space to hold the files you wish
to transfer.
3. Repeat the instruction for copying files as described previously.
Make sure to test all your source and target devices before first use
In some exceptional cases it is possible that the USB Anywhere indicates a correct data
transfer when in fact the files have not been transferred. In this case your source or target
device is not compatible with the USB anywhere and they should not be used together.
When you first use the USB Anywhere, please test all your source and target devices for
compatibility by copying a file from the source to the target device and checking the copied
file. When the transfer is succesful, your device is fully compatible.