Saivod HB-1913A Manual De Instrucciones página 26

4. Operation of the blender -Speed settings:
Press and hold the low speed button to start operating.
At the same time you can select desired speed setting by dialing the speed control dial, there are five
settings: 1, 2, 3, 4, 5 (from low speed to high speed).
You also can start operating by pressing and hold the high speed button (turbo button), the appliance
will operate at the highest speed all the time. The speed will not change even if you dial the speed
control dial.
To stop the hand-held blender by releasing the low speed button or high speed button.
5. Operating times
Max operation duration per time cannot exceed 1 minute, and 3 minute rest time must be maintained
at two consecutive cycles.
INSTRUCTION FOR CHOPPER
1. Place the chopper bowl on a clean, level surface.
2. Assemble the stainless chopping blade into the chopper bowl, as shown in Fig.1.
3. Place food into the chopper bowl.
Note: remove the bone of the meat, cut small piece, then place the meat into bowl, the max quantity of
meat can't exceed 200g in every blending.
4. Attach the lid onto the chopper bowl, make sure the tuber on the inside wall of bowl aligns with the
groove of lid, then put down the lid and turn it in clockwise direction until it locks into position. (See
Fig.2) To detach the lid, turn in adverse direction.
5. Insert the motor unit into the hole of the chopper lid, and turn in clockwise direction to lock. (See
Fig.3)
6. Plug the appliance to power outlet.
7. Operation of the chopper -Speed settings:
Press and hold the low speed button to start operating.
At the same time you can select desired speed setting by dialing the speed control dial, there are five
settings: 1, 2, 3, 4, 5 (from low speed to high speed).
You also can start operating by pressing and hold the high speed button (turbo button), the appliance
will operate at the highest speed all the time. The speed will not change even if you dial the speed
control dial.
To stop the appliance by releasing the low speed button or high speed button.
8. Operating times
Max operation duration per time cannot exceed 1 minute, and 3 minute rest time must be maintained
at two consecutive cycles.
9. After finishing chopping, unplug the power outlet firstly, then remove the motor unit from the
chopper lid by turning it in anti-clockwise.
10. Open the chopper lid by turning it in anti-clockwise and remove the chopped food.
CAUTION:
- To reduce the risk of injury, never place cutting blade on base without first putting bowl properly in
place.
26
HB1913.indd 26 20/3/27 上午10:30