Cleaning And Maintenance - Saivod HB-1913A Manual De Instrucciones

CLEANING AND MAINTENANCE

1. Unplug the appliance and remove the detachable stem.
NOTE: Do not immerse the detachable stem of the blender in water because overtime the
lubrication on the bearings may wash away.
2. Wash the detachable stem under running water, without the use of abrasive cleaner
or detergents. After finishing cleaning the detachable stem, place it upright so that any
water which may have got in, can drain out. The stem is dishwashing safe component.
3. Wash the cup, bowl, beater and blade in warm soapy water. The bowl and the beater
are not recommended to place in dishwashing machine as the plastic component
deteriorates through prolonged use of dishwasher cleaning.
4. Wipe the motor unit with a damp cloth. Never immerse it in water for cleaning as a
electric shock may occur.
5. Dry thoroughly.
CAUTION: Blades are very sharp, handle with care.
6. Reassemble the blender shaft to motor unit then place it upright in wall bracket (see
Fig.4) or hang it up for saving space.
QUICK CLEANING
Between processing tasks, hold the hand-held blender in the cup half filled with water and turn on for
a few seconds.
FIXING WALL BRACKET
You can fix the wall bracket as following:
1) Drill two same holes in wall and strictly follow the dimension
as indicated in the fig.5.
2) Knock two plastic tubes in them with hammer.
3) Secure the bracket on wall with another two screws.
When the time comes to eliminate this product, please consider the environmental impact and
take it to recognised recycling facility instead of disposing it with general household waste. Take
the equipment to a waste disposal site. Plastic and metal parts that are used in the construction of
this appliance can be separated into pure grade which allow recycling. Ask to your service centre
for details. Everyone of us can participate on the environmental protection
Class II appliances
28
HB1913.indd 28
Fig. 4
6 m m
5 1 m m
Fig. 5
.
20/3/27 上午10:30