System Requirements - Manta MM631CS Manual De Usuario

18. Handgas: with hot-swap function button, when discon-
nected the pedal, right ear button is has function of
button X; when connected the pedal, right ear button
is R3 button (Programmable buttons).
19. Pedal brake:  button (programmable button).
20. Pedal gas: X button (programmable button).
21. Hand brake:  button.
22. Gear shift stick: Front for R2 function; Back for L2
function; Left for L1 function; Right for R1 function.

system requirements

1. IBM Pc or its compatible computer
2. PS3/PS2 console and computer USB port
3. 166 MHz or higher processor
4. 64 M or more than 64M internal memory
5. Windows 9x/ME/2000/XP/Vista32
6. DirectX 7.0 or higher version
Programming Function using
Programming mode: Press MODE button to enter anal-
ogy mode, and then press SEN button triple ,the LED lights
orange. it means entering to programming mode.
Programming buttons: Right Ear Gas, Left Ear hand
brake, Gas( Foot), Brake (Foot), Function + button; Func-
tion – button.
Programmed buttons: R1, R2, L1, L2, , , X, 
Programming methods: when you press SEN triple, the
orange LED lights, then press the programmed buttons
and need programmed buttons simultaneoursly, vibration
motor means finishing programming. For example, press
Gas (Hand) and L2 button, vibration motor means finishing
programming. Gas (Hand) will have the L2 function. After you
programmed, press SEN button to exit programming. In the
programming process, pls divide three groups to program,
one group is pedal gas and pedal for brake; two group is
Manual speeding up and manual braking; three group is
function buttons + and - .After a group in the programming
finished, pls exit programming mode, and then to next
group to program.
attentions
1. Before connect the wheel to the console, pls don't touch
any buttons like function buttons or pedal. Otherwise some
buttons will have no function.
2. After you programmed, pls do press SEN button to
exit programming.
3. In the game of PS3 console, after power on, pls press
MODE+SELECT buttons to enter the game.
USER ManUal
4. Pls don't connect the pedal in the process of game, if
you want to connect the pedal ,you need to power off the
steering wheel first.
5. Port selecting : In the condition of normal game, pls don't
pull up the USB plug of steering wheel on the PS3 console,
if pull up USB plug circularly, the steering wheel will be no
function when entering the game, you need to select the port.
The way of channel selecting: if the steering wheel will be no
function in the game, however, the setting function of console
is OK, at this state, you should select the other port. In the
GT game, press MODE button to enter the console setting,
and then press MODE twice to enter port selecting mode,
to select the first or second port; last press confirm to exit
.That is OK. In the NEED FOR SPEED game, press MODE
button once ,you can enter the port selecting mode.
troubleshooting
the steering Wheel does not locate
in the neutral centre
Do not turn the Wheel when you are switching on your
z
PlayStation. If the Wheel is not at its neutral (centre)
position when the console is turned on, then the position
that it is held at will be read as the new neutral (centre)
position, and this may cause the unit to operate incor-
rectly. To reset to the neutral position, switch off the
console, leave the Wheel centralized, and then turn
on the console again.
the steering Wheel does
not function properly
Please check to ensure that the button/pedal not
z
working has not been relocated – Please follow the
instructions in the Relocation section. Please follow
the instructions to clear a button remap.
on Playstation
Check Steering Wheel mode switch, the "Analog But-
z
ton". If the game does not support the mode that you
have set, then Steering Wheel may not operate cor-
rectly. Try to select another mode to suit the game &
reset your console.
6