Fcc Statement And Emc Compatibility; Maintenance, Storage And Calibration - HealthSmart 18-220-000 Manual De Instrucciones

FCC Statement and EMC Compatibility

15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.

Maintenance, Storage and Calibration

Maintenance:
1. To ensure accurate measurements, keep the infrared
sensor and distance sensor tip clean and free of scratches.
Finger prints, ear wax or dirt will affect the accuracy of the
thermometer.
2. To clean the infrared sensor gently wipe the sensor with
a cotton swab slightly moistened with 75% alcohol and
immediately wipe dry with a clean cotton swab (Fig 1).
The thermometer can be used after 10 minutes when the
alcohol dries.
3. Use a soft dry cloth to clean the body of the thermometer
(Fig 2).
4. Never clean the thermometer with an abrasive cleanser,
thinner, or submerge the thermometer into water or other liquids.
Storage:
1. After each use clean the thermometer.
2. Store the thermometer and lens covers in a clean dry place at room
temperature. NEVER leave the thermometer exposed to direct sun, high
temperatures, humidity, fire, flames, shocks or impacts.
3. If you do not use the thermometer for a long time, take out the batteries.
Calibration:
1. The thermometer is factory-calibrated. If the thermometer is used according
to the user manual, periodic calibration is not required. Do not try to modify
or reassemble the thermometer.
14
FIG. 1
FIG. 2