Adjusting The Direction Of Air Circulation; Swing Operation - Fujitsu AUHG24LVLA Manual De Usuario

ADJUSTING THE DIRECTION OF AIR CIRCULATION

Instructions relating to heating (*) are applicable only to "HEAT & COOL MODEL" (Reverse Cycle).
Begin air conditioner operation before performing this procedure.
Vertical Air Direction Adjustment
Press the SET button (Vertical).
Each time the button is pressed, the air direction range will change as follows:
The remote controller's display
does not change.
Airfl ow direction setting:
1 , 2 , 3 , 4 : During cooling/heating/dry mode
The vertical airfl ow direction is set automatically as shown, in accordance with the
●
type of operation selected.
During cooling/dry mode
During heating mode *
During AUTO mode operation, for the fi rst minute after beginning operation, airfl ow
●
will be horizontal 1 ; the air direction cannot be adjusted during this period.
Horizontal Air Direction Adjustment
The function cannot be used.

SWING OPERATION

Begin air conditioner operation before performing this procedure.
To select SWING Operation
Press the SWING button
The SWING indicator will light.
In this mode, the airfl ow direction louvers will swing automatically to direct the air fl ow
both up and down.
To stop SWING Operation
Press the SWING button once again.
The SWING indicator will go out.
Airfl ow direction will return to the setting before swing was begun.
About SWING Operation
The type of operation
Cooling/Heating/Dry/Fan
1 2 3 4
: Horizontal fl ow 1
: Downward fl ow 4
Range of swing
1 to 4
The SWING operation may stop temporarily when the air conditioner's
fan is not operating, or when operating at very low speeds
Attempting to move up/down air direc-
●
tion flaps manually could result in im-
proper operation; in this case, stop op-
eration and restart. The louvers should
begin to operate properly again.
When used in a room with infants, chil-
●
dren, elderly or sick persons, the air
direction and room temperature should
be considered carefully when making
settings.
En-11