NAME OF PARTS
Indoor unit
En-4
1 Air Filter (in air intake grille)
2 Airfl ow direction fl aps
3 Air intake grille
4 Control panel
5 Remote control signal receiver
6 MANUAL AUTO button
When the MANUAL AUTO button is pressed in for more than
●
10 seconds, the forced cooling operation will start.
The forced cooling operation is used at the time of installation.
●
Only for authorized service personnel's use.
When the forced cooling operation starts by any chance,
●
press the START/STOP button to stop the operation.
Please press the button at Filter Reset.
●
7 OPERATION indicator lamp (green)
8 TIMER indicator lamp (orange)
TIMER indicator lamp lights when the timer is set from wireless
remote control.
9 ECONOMY indicator lamp (green)
ECONOMY indicator lamp lights in following operations:
ECONOMY operation
●
10°C HEAT operation (controlled by wireless remote
●
controller)