Bluetooth Operation - Manta SPK207 Manual De Usuario

NOTE: These speakers are not magnetically shielded and may cause color distortion on the
screen of some TVs or video monitors. To avoid this, you may need to move the speakers
further away from the TV or monitor if unnatural color shifts or image distortion occurs.
Power on/off the unit
When using either the AC adaptor, first slide the main power switch on the back of the unit
to the ON position prior to use. The display backlight turns on and the icon shows on the
display.
1. To place the unit power on or into Standby mode, press and hold the
button.
2. To switch off the unit, slide the main power switch to OFF position.
1. Press and hold the "Stand-by/Mode" button to turn on the unit.
2. Tap the "Stand-by/Mode" button to select USB/SD mode, the 'USB/SD' icon on
display.
3. Put USB or SD device into the USB/SD port ,To select any track please tap the "PREV
"or "NEXT" button.
PAIRING (LINKING) A BLUETOOTH ENABLED CELLPHONE OR OTHER BLUETOOTH ENABLED
DEVICE TO THE SPK207
If the SPK207 has never been paired with a Bluetooth device before, you will need to follow
the pairing instructions below to link the SPK207 with your Bluetooth device.
1. Turn the unit on, tap the "Stand-by/Mode" button to select Bluetooth mode, the
blue led icon flashing will show on the display. The SPK207 is now ready to pair
(link) with your Bluetooth device.
2. Turn on the Bluetooth feature of your cell phone and enable the search or scan
feature to find the SPK207
3. Select " SPK207" from the device list when it appears on your device screen. If
required, enter the pass code "0000" to pair (link) the unit with your device.
4. After successfully pairing (linking) the Bluetooth enable device, the blue ambient
light will stop flashing and light steadily and a short beep will be heard. You can now
play music from your cell phone or Bluetooth device wirelessly to the SPK207.
5. If you want to connect the SPK207 to another cell phone after pairing successfully,
press and hold the' /PAIRING' button for 2 seconds, the Blue LED backlight will
change to flashing again, repeat step 2-4 above.
User's Manual
TURNING THE UNIT POWER ON/OFF
LISTENING TO THE USB/SD

BLUETOOTH OPERATION

15
E N