H.Koenig MX15 Manual De Utilización página 4

3． First ring the Glass cup sealed ring into blade base, then enclose the blade base into Blending glass cup,
last rock the Blending glass cup slightly causing it to lock into place.
4． Put the Blending glass cup base on the top of motor mainbody; please pay attention to match the position
of blending glass cup and the bulge of the motor mainbody. Fill the jug with the desired foods. please
ensure the water not spill over from cup.( Maximal water capacity can not exceed 1500 ml)DO NOT USE
THE UNIT WITHOUT ANY MATERIAL INSIDE.
5． Put the lid on top of the blending glass cup and push it down. Insert the closure into the lid and turn till it
locks into place.
6． Place the measuring cup on the center of lid, anticlockwise rock the measuring cup slightly.
1． Connect the power.
2． This unit have safety design, it do not working if the blending glass cup is not install on motor main body
properly.
3． turn the turning knob */0/1/2 to position 0 in order to make sure the unit is turned off.
4． Fill the jug with the desired foods.
5． Put the lid on top of the blending glass cup and fix it. Place the measuring cup on the center of lid,
anticlockwise rock the measuring cup slightly.
6． Turning the knob to required speed(P—pluse,1—low speed,2—high speed)
Speed adjust：
P—pulse –Stainless steel blade operate with transitorily highest speed, suitable for ice.
1—low speed - Stainless steel blade operate with low speed, suitable for elementary blending.
2—high speed - Stainless steel blade operate with high speed, suitable for symmetrical blending.
0—turn off the unit.
Caution:
1. Over-filled can block the operation, please turn off the unit and do
not connect the plug, take out some of material, then operating.
2. Do not use unit continuous more than 1 minute
OPERATION