Kohler K-110 Guia De Instalacion página 8

Flange
Setscrew
5. Wall-Mount Elbow Installation
Loosen the flange setscrews.
Carefully slide a flange onto one of the plated elbows. Be careful
to avoid scratching the plated finish.
Apply thread sealant to the threads of the plated elbows.
Insert one of the plated elbows through the wall and into a
supply ell.
Thread the plated elbow into the supply ell and tighten with a
clean strap wrench. Position the plated elbows with the opening
facing up.
Carefully slide the flange over the plated elbow and up against
the finished wall.
Tighten the setscrew.
Repeat for the other plated elbow.
1008209-2-H
Apply thread
sealant.
Plated Elbow
8 Kohler Co.