Parts And Components - cecotec CONGA Manual De Instrucciones

ENGLISH
Please turn off all controls before unplugging the appliance
from electrical outlets. Do not leave the cleaner unattended
while in operation. Unplug the electrical cord when not in use
and before doing maintenance. Do not touch the plug or the
vacuum cleaner with wet hands.
Store your appliance indoors in a cool, dry area.
Unplug the electrical cord when not in use and before doing
maintenance.
Do not use outdoors under adverse weather conditions.
Check that the mains voltage corresponds with the rating of
the appliance before operating.
No liability can be accepted for any damage caused by
noncompliance with these instructions or any other improper
use or mishandling.
Check the power cord for visible damage. If the cord is
damaged, it must be replaced by the official Technical Support
Service of Cecotec, in order to avoid any type of danger.

2. PARTS AND COMPONENTS

Fig. 1
1. Handle
2. Power control
3. Power cord
4. Suction channel
5. Water tank
6. Air pipe inlet assembly
7. Plastic bucket
8. Bucket base
9. Omnidirectional wheel
10. Wet brush
11. Upholstery brush
12. Universal brush
13. Crevice tool
14. Floor nozzle
14
05499_Conga Wet&Dry TotalClean_Manual_YV01191209.indd 14 05499_Conga Wet&Dry TotalClean_Manual_YV01191209.indd 14 26/12/19 10:11 26/12/19 10:11