Product Assembly - cecotec CONGA Manual De Instrucciones

15. High-efficiency filter
16. Telescopic tube
17. Flexible hose
18. Water/dirt tank
19. Safety clamp
20. Air outlet
21. ON/OFF switch

3. PRODUCT ASSEMBLY

Attach the wheels to the base of the container (Fig. 2).
Connect the hose to the cleaner
Insert the hose into the suction channel and turn it clockwise to lock it.
(Fig. 3).
Connect hose, plastic tubes and accessories
Connect the telescopic tube (Fig. 4).
Connect the telescopic tube to the handle of the hose (Fig. 5).
Airflow
Adjust the air flow button to control the power (Fig. 6).
Add water
Add water to water max. level (Fig. 7). Do not exceed the max level, or the water will spill out.
High-efficiency filter
Rotate the deposit cap anticlockwise to remove the lid.
Rotate the high-efficiency filter base anticlockwise in order to remove the high-efficiency
filter.
The high-efficiency filter must be cleaned regularly in order to keep a high suction power.
Once removed the filter, clean it with lukewarm water (no detergents).
Once the filter is completely dry, rotate it clockwise to set it. (Fig. 8)
Place the water tank cap
Put the water tank cap in its place and rotate it clockwise to close it (Fig. 9).
Safety clamp
Place the head unit and use the clips to lock the head by pushing them down.
Push clips down to lock. (Fig. 10)
05499_Conga Wet&Dry TotalClean_Manual_YV01191209.indd 15 05499_Conga Wet&Dry TotalClean_Manual_YV01191209.indd 15
ENGLISH
WET&DRY TOTALCLEAN
15
26/12/19 10:11 26/12/19 10:11