Tripp-Lite B024-DUA8-SL Manual Del Propietário página 27

Basic Operation
F7: SCAN
Clicking the F7 field or pressing [F7] invokes Auto Scan mode. This function
automatically switches among the available computers at regular intervals so you can
monitor their activity without having to go through the task of switching manually.
• The selection of computers to be included for auto-scanning is made with the Scan–
Skip mode setting under the F3: SET function (see F3: Set Environment section of
this manual for details).
• The amount of time each port displays is set with the Scan Duration setting under
the F3: SET function (see F3: Set Environment section for more information). To
stop at a particular location, press [Spacebar] to stop scanning.
• If scanning stops on an empty port, or one where the computer is attached but
powered Off, the monitor screen will be blank and the mouse and keyboard will have
no effect. Once the scan duration time expires, the scan function will proceed to the
next port.
• As each computer is accessed, an "S" appears in front of the port ID display to
indicate it is being accessed under Auto Scan mode. When the port ID with symbol
displays, the background screen is blank.
• While Auto Scan mode is in effect, the console will not function normally. You must
exit Auto Scan mode in order to regain control of the console.
• While you are in Auto Scan mode, you can pause the scanning in order to keep the
focus on a particular computer either by pressing P , or with a left click of the mouse.
• To exit Auto Scan mode, press [Spacebar] or [Esc].
F8: LOUT
Clicking the F8 field or pressing [F8] logs you out of OSD control of the computers and
blanks the console screen. This is different from simply pressing [Esc] when you are
at the main screen to deactivate the OSD. With this function, you must log in again to
regain access to the OSD, whereas with [Esc], you will only need to reenter the OSD
by pressing the OSD hotkey.
Notes:
• When you re-enter the OSD after logging out, the screen remains blank except for the OSD
main screen. You must input your username and password before you can continue.
• If you re-enter the OSD after logging out and immediately use [Esc] to deactivate the OSD
without having selected a port from the OSD menu, a null port message displays on the screen.
The OSD hotkey will open the main OSD screen.
17-10-479-93370A.indb 27
27
11/17/2017 2:29:03 PM