Kohler K-1146 Guia De Instalacion página 2

No change in measurements if
connected with drain illustrated.
(K-11677 or K-11677M)
20"
(50.8 cm)
3-1/8"
(7.9 cm)
8" (20.3 cm)
2-1/2"
(6.4 cm)
Product Information
Applicable product:
Oval bath whirlpool – drop-in rim style
Fixture*:
Bathing well:
Basin area, bottom
Basin area, top
Weight
To overflow:
Water depth
Capacity
* Approximate measurements for comparison only.
Pump: V
1-speed 120
Included components:
Cut-out template
Recommended accessories:
Adjustable trip lever drain – through-the-floor
installation
1013781-1-C
1" (2.5 cm)
60" (152.4 cm)
2-7/8" (7.3 cm) 3/8" (1 cm)
3" (7.6 cm)
K-1146
46" (116.8 cm) x
19" (48.3 cm)
55" (139.7 cm) x
29" (73.7 cm)
56 lbs (25.4 kg)
14" (35.6 cm)
54 gal (204.4 L)
Hz A
60 7.5
5/8" (1.6 cm)
29" (73.7 cm)
26" (66 cm)
20" (50.8 cm)
1" (2.5 cm)
4" (10.2 cm)
5" (12.7 cm)
10" (25.4 cm)
9" (22.9 cm)
1-1/4" (3.2 cm)
Drain End
Required
Pump/Control
Access
17-5/8"
16-1/8"
(44.8 cm)
(41 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
32 lbs/square foot (156 kg/square meter) loading.
The suction line extends 1" (2.5 cm) beyond the edge of the rim.
The pump base extends 1-1/8" (2.9 cm) beyond the edge of the
rim. Modify the framing as needed.
A minimum access panel is required as illustrated. This should be
20" (50.8 cm) wide and 15" (38.1 cm) high. Locate the access panel
at the pump location.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
114859-7
K-11677
2
29-3/4" (75.6 cm)
28" (71.1 cm)
20" (50.8 cm)
10" (25.4 cm)
Symmetrical About C L
Cut-Out Detail
40" (101.6 cm)
1-1/2" OD
120 V, 15 A, 60 Hz
1" (2.5 cm)
4" (10.2 cm)
6" (15.2 cm)
8" (20.3 cm)
1-1/2"
(3.8 cm)
Drop-In
Rim Detail
Kohler Co.