Modes Of Operation; System Address - IVAC Pro TOOL Guia Del Usuario

Each time a power tool that is connected to an 'iVAC Pro Tool'
is turned on or off, the associated 'iVAC Pro Tool' (In the Auto
mode.) will communicate with an 'iVAC Pro Switch'. In turn
the 'iVAC Pro Switch' will react to the communication by
turning the dust collection system on or off.

5.1 Modes of Operation

The 'iVAC Pro Switch' has three modes of operation;
Auto – Off – On, as set by the Mode Switch. In the Auto
mode, it receives information from an 'iVAC Pro Tool' and
will turn the dust collection system on or off as instructed.
In the Off mode, the 'iVAC Pro Switch' will maintain the
dust collector in an off state. In the On mode, the 'iVAC Pro
Switch' will turn the dust collection system on.

5.2 System Address

By means of the Program Switch, the 'iVAC Pro Switch' can
be assigned to work on one of four system addresses, A, B,
C or D. The system address is to enable up to four systems
to operate independently while within communication range
of each other.
All units required to operate together must be set to the
same System Address.