General Description Of 'iVac Pro System - IVAC Pro TOOL Guia Del Usuario

3.

General Description of 'iVAC Pro System'

The 'iVAC Pro System' consists of two families of product, the
'iVAC Pro Tool' unit and the 'iVAC Pro Switch' unit.
A work shop system may consist of up to eight 'iVAC Pro Tool'
units and at least one 'iVAC Pro Switch' unit.
The 'iVAC Pro Tool' unit is connected to the AC mains supply
by means of its power cord and then to a workshop tool
through its AC receptacle.
If an 'iVAC Pro Tool' unit is in the Auto mode when a power
tool that is connected to it is powered on, the 'iVAC Pro Tool'
unit will transmit, by means of a wireless signal, to the 'iVAC
Pro Switch' instructing it to turn on.
The 'iVAC Pro Switch' unit is connected to the AC mains
supply by means of its power cord and then to a workshop
dust collection system through its AC receptacle.
When the 'iVAC Pro Switch' receives a signal from the 'iVAC
Pro Tool' instructing it to turn on, it will supply power to the
dust collection system. After the power tool has been turned