Sony SU-XWQ005 Guia Del Usuario página 12

Note on connecting the display interface cable
VMC-X10 (not supplied) without using the cable
hole of the Plate Unit
When connecting the display interface cable VMC-
X10 (not supplied), leave some upward slack in the
cable to avoid stressing it. Otherwise, the connector
may become loose and the picture may not appear
on the screen, or the Display Unit will not turn on.
10
(US)
Leave some upward slack
in the cable.
Remove the Display
Unit
1
Disconnect the AC power cord
and the display interface cable
from the wall outlet and the
Display Unit.
2
Remove the two securing screws
on the right and left Mounting
Hook Unit support shafts.
3
Be sure to have two or more
persons hold the Display Unit
and slide it upward to remove
the Display Unit.
WARNING
• Be sure to have two or more persons hold the
Display Unit when carrying it.
• Be careful not to allow the cord and cables to
get hung up when removing the Display
Unit.
• Be careful not to hurt your hands or fingers
when removing the Display Unit.
For Sony Dealers