Rotating Mixer Mr10L - Chopin MR2L Modo De Empleo

Chapter 2
User's manual 
02/2017
MR2L/MR10L

ROTATING MIXER MR10L

■ The agitation unit is equipped with two 10 litre bottles
(dimensions: Ø 200 mm, length to collar bottle 300 mm).
■ The instrument functions with a three phase motor connected to
220 or 380 V. To begin mixing, turn the handle of the timer clockwise
and set to the desired time. The mixer stops automatically at the
end of the time set. It is possible to stop the mixer during its cycle by
turning it in the opposite direction until it clicks off.
■ It is important to the consistency of the mixture that the flask not
be filled over 60 - 65 % of its capacity: 6 - 6.5 litres.
■ Taking into account the apparent density of products to be mixed,
the maximum is therefore:
❏ Flour
❏ Wheat
■ The mixer is furnished with 2 screws:
❏ 1 screw "wheat", with threads in one direction,
❏ 1 screw "flour", with threads in two opposing directions (Archime-
des screw).
■ One or the other of these screws are introduced into the bottle
after it has been filled with the product, and it is held by tightening
the cover on the collar of the bottle.
■ The recommended milling time is between 10 and 15 minutes.
Chapter 2 Rotating mixer MR10L
2,5 - 3 kg
4 - 4,5 kg
GB
29