Technical Specifications - IK Metal 6 Instrucciones Originales

USES AND SECURITY REGULATIONS
5
1) Always follow the manufacturer's instructions and recommended doses on the packaging labels of the chemical product to be used.
2) In order to avoid any swallowing of the product, do not eat, drink or smoke during preparation and spraying process.
3) Do not spray on people, animals, electric installations, flames,open fire or other sources of ignition.
4) Do not use the treatment when there is strong wind or extreme heat.
5) In case of poisoning, consult your physician/doctor, and taking the chemical product packaging with you.
6) Do not dump product or cleaning residues near water bodies, wells, etc.
7) Use suitable protective equipment, masks, goggles, gloves, footwear etc in order to avoid contact of the chemical products with skin, eyes
and mouth (Figure 13)
8) Read the sprayer instructions before use. Do not modify the sprayer. Do not obstruct or strike the safety valve (1167). Do not use the
sprayer if it is damaged, deformed or if its original shape has been altered. Store the sprayer indoors protected from frost and fierce heat
(40w & 85º F) between 5º and 30ºC). If it is noted that the hose (1172), tank, handle (1179) or any of its connections are damaged do not
attempt to repair, replace with a new part.
9) Keep sprayer out of reach of children.
10) Use the sprayer only with substances which are compatible (Scope of Application).
11) The safety valve must not be bypassed (1167).
12) In the event that the sprayer material come into contact with hydrogen peroxide or products with a similar oxygen release, pressure may
produce pressure surges and result in an explosion. Never use these types of products.
13) Do not leave the sprayer under pressure or under the sun. Ensure that the sprayer does not overheat above the operating temperature.
14) Never purge the nozzles or valves by blowing via the mouth them yourself.
15) Use only manufacturer spare parts and accessories.
16) We shall not be held liable for damages of any nature occasioned by the use of foreign parts.
17) During pumping, take care that the pressure gauge does not exceed the max. spraying pressure. Depressurise the tank completely prior
to filling, after use and prior to performing maintenance work.

TECHNICAL SPECIFICATIONS

6
TOTAL CAPACITY
USEFUL CAPACITY
LITRES/MIN. 3 BAR
GROSS WEIGHT
NET WEIGHT
- Oil resistant seals and materials and resistant to most
hydrocarbons and solvents.
- 6 bar / 88 psi safety valve.
- Parking for lance.
- Chamber fastening system during filling.
- Pressure gauge.
WARRANTY
It is hereby warranted that from first purchase and during the corresponding legal warranty period (max. 2 years) that this apparatus is free
from material and processing errors. If any errors are detected during the warranty period, the manufacturer or distributor in your country
shall repair or (in the manufacturer's opinion) entirely replace it or the damaged parts, without charging the costs of labour and materials.
If so, it is requested that you immediately contact us in that regard. The apparatus's invoice or purchase receipt is required.
Wear and tear parts (joints, o-ring, washers etc) and defects caused by an improper use or on grounds of force majeure are excluded from
the warranty.
CE Declaration of Conformity
according to EC Machinery Directive 2006/42/EC, Appendix II, No. 1A.
We,
Goizper Group - c/Antigua 4 - 20577 Antzuola - Spanien
We hereby declare under our sole responsibility that the following product "high-pressure spray" of the 3585M and 3565M, serial number
1900000 onwards in the supplied model is in conformity with the provisions laid down in Directive 2006/42/EC. The product likewise
complies with Directive 2014/68/EC on pressure equipment.
Mikel Irizar, c/Antigua 4, 20577 Antzuola, Spain, is authorised to compile the technical file.
Antzuola, 2016
Mikel Irizar
Technical Manager
IK METAL 6
9 l. – 2.37 U.S. Gallons.
6 l. - 1.58 U.S. Gallons.
0.50 l/min. - 0.13 gal/min.
4.8 Kg - 10.6 lbs.
4.4 Kg - 9.1 lbs.
IK METAL 10
13 l. – 3.43 U.S. Gallons.
10 l. – 2.64 U.S. Gallons.
0.50 l/min. - 0.13 gal/min.
5.5 Kg - 12.1 lbs.
5.1 Kg - 11.4 lbs.
- Compressed air connector (IK METAL 10).
- Funnel integrated into tank.
- Metal opening and locking handle.
- Filter in the lance.
- Option of fitting a 50 cm / 19.7" extension tube.
- Shoulder straps for overshoulder transport.
- Adjustable cone nozzle and standard fan nozzle.