Technical Specifications - IK FOAM 1.5 Manual De Instrucciones

EN
1
FIELD OF APPLICATION
Sprayers specifi cally manufactured for the generation of dry and long lasting foam. Designed for use with chemical agents
with surfactant properties (surface active). The IK FOAM sprayers range provides the user a dense and durable foam suitable
for cleaning and disinfecting upholstery and carpets, disinfecting bathrooms and changing rooms, kitchens and food
processing stations, car washes etc.
Given the great variety of products in the market, Goizper cannot guarantee the universal validity of its equipment. In any
case, we recommend using certifi ed chemicals.
2
SETTING UP & SPRAYING
1) Screw tightly to close. Depressurize the device to open pulling the safety valve.
2) Once the tank has been fi lled to the maximum level of 0.75 litres.
3) Pour the foaming product.
4) Screw the cap onto the tank and pressurise the apparatus performing strokes. For a good quality foam it is important to
pressurise until the valve clicks.
3
MAINTENANCE
1) After each use depressurize the sprayer and clean it with water.
2) In the event of obstruction of the nozzle, clean it with water and do not use metallic objects.
3) In order to prolong the life of the joints, regularly apply some drops of oil or grease on the moving parts.
4) To access the valve chamber (165), remove the cylinder guard by pulling it fi rmly.
5) To access the rod's O-ring (603), unscrew the piston and remove it until leaving visible the aforementioned O-ring.
6) The apparatus has a felt pad installed in front of the nozzle. This fi lter is to be cleaned with water when it is dirty. If the
fi lter is completely deteriorated due to wear and tear, the apparatus has a replacement part.
4
USES AND SECURITY REGULATIONS
1) Always follow the instructions and dosages on the packaging labels, that the manufacturer recommends for the chemical
product to be used.
2) In order to avoid any swallowing of the product, do no eat, drink or smoke whilst handling the treatments.
3) Do not use the spray on persons, animals, or electric installations.
4) Do not use the treatment when there is strong wind or extreme heat.
5) In case of poisoning, seek a physician, taking the labelling of the chemical product with you.
6) Do not dump product or cleaning residues near water bodies, wells, etc... that will be utilized for use by – human or
animal consumption.
7) Use appropriate safety equipment, mask, goggles, gloves, footwear etc in order to avoid contact of chemical products
with skin, eyes and mouth.
8) Read the instructions for the sprayer before its use. Do not modify the sprayer. Do not connect it to an external pressure
source (manual use only). Do not obstruct or strike the safety valve. Do not use the sprayer if it is damaged, deformed or
altered from its original shape. Store the sprayer protected from frost and fi erce heat (between 5º and 30º C).
9) Air pressure may be a dangerous factor, utilise the sprayer with precaution.

TECHNICAL SPECIFICATIONS

- Total capacity: 1.50 l - 0.39 U.S. Gallons.
- Useful capacity: 0.75 l - 0.19 U.S. Gallons.
- Net weight: 0.46 kg - 1.02 lbs.
- Gross weight: 0.60 kg - 1.32 lbs.
- Volume per unit: 0,006 m
- Packaging measurements: 16 x 16 x 27 cm.
3
- Units/m : 150 u.
- All plastic parts and washers resistant to most acids and
solvents, as well as to most chemical agents widely used in
the world of industry, automotive and professional cleaning.
- 3 bar safety valve with depressurization option.
3
- Large opening for easy fi lling and cleaning.
- Ergonomic design.
- Strong translucent tank with level indicator.
- Protective sleeve for valve chamber.
- Easy assembly and taking apart for cleaning and
maintenance, tool free.
- Special "foam" even fan type nozzle.