Leggett & Platt PREMIER FOUNDATION DESIGN Manual Del Usuario página 9

STEP 2
With packing carton still on adjustable base (with
bottom of base exposed), install 4 legs. Simply
screw each leg (wood or steel) into a tapped hole at
each corner of the base frame (FIGURES 4 and 5).
Note: Allowing base to remain in packing carton will
prevent it from laying on an unclean surface.
FIGURE 4 (FURNITURE DESIGN)
FIGURE 5 (FOUNDATION DESIGN)
LEGS – SCREW
INTO TAPPED
HOLE AT
EACH CORNER
INSTALLATION
PUSH PIN IN
TO ADJUST LEG
HEIGHT
(6 INCHES TO
10 INCHES)
WARNING
AT LEAST TWO PEOPLE ARE
RECOMMENDED FOR HANDLING AND
MOVING ADJUSTABLE BASE.
CAUTION
DO NOT ATTEMPT TO SCREW
LEGS INTO ANY OTHER INSERTS.
THIS WILL DAMAGE PRODUCT.
Premier Series Owners Manual 99301588-b
™
9