en
44 | WBE 4510 | Operation
7.
Operation
7.1
Screen layout
4
3
Fig. 4:
Main page
Item Designation Description
1
Menu bar
The functions available in the correspond-
ing menu are displayed. Select the re-
quired function by pressing the navigation
keys and confirm with <OK>.
2
Display
The following information is displayed
field
here:
Rim data and positioning of vernier cali-
per/gauge arm.
Information on positioning and mass of the
balance weights.
3
Status bar
Display according to menu selected:
+ Current user.
+ Vehicle selected.
+ Balancing program selected.
+ Number of wheel spokes se-
lected in "split program".
4
Naviga-
The navigation keys and the <OK> key are
tion menu
used to operate the WBE 4510. The corre-
sponding functions are described in
Table 1.
7.2
WBE 4510 operating unit
The software is controlled by way of the four naviga-
tion keys and the <OK> key on the operating unit. The
corresponding function of the keys is displayed in the
navigation menu (depending on the menu selected and
the function selected in the menu bar).
|
1 695 655 163
2010-07-17
7.3
The content of the navigation menu is dynamic and var-
ies according to the menu selected and the functions
available. The navigation menu is controlled 1:1 via the
1
operating unit.
2
Keys
Navigation
keys
ovuz
<OK>
<GO>
<X>
<STOP>
Tab. 1:
i
The values or settings are always confirmed with
<OK>.
7.4
Symbol
Navigation menu
Description
Navigation in menu bar and selection menus.
Alteration of rim data values.
Storage of settings selected.
Call-up of menus or programs, function depends
on symbol in menu bar.
Selection of functions in menu bar,
navigation switches to menu bar.
Start of measurement.
Navigation exits from menu bar,
return to previous page or
to Start page (depending on menu).
Interruption of measurement.
Navigation menu
Wheel lift operating unit
Description
Key has no function.
HOLD key
Securing of wheel on wheel lift slide to prevent
tipping.
UP key
Raising of wheel lift slide
DOWN key
Lowering of wheel lift slide
Robert Bosch GmbH