Installation Notes - Miele PG 8055 Plano De Instalación

en - Installation notes
Installation re-
quirements
Electrical connec-
tion
Equipotential
bonding and
earthing
12

Installation notes

For safe installation and commissioning of the dishwasher please
read the installation plan, the service documentation and the oper-
ating instructions.
This installation plan includes the dimensions of the appliance, the
technical data and the requirements to be met on site for the installa-
tion of the dishwasher.
This dishwasher must be installed by an authorised technician in ac-
cordance with the installation instructions supplied.
This dishwasher must be installed in accordance with all applicable
standards and guidelines, including legal requirements and health
and safety regulations.
Connection to the electrical supply should be in accordance with
valid regulations and safety standards. The connection cable must be
protected from the risk of thermal damage.
We recommend connecting the dishwasher to the power supply via a
suitable plug and socket as this will make it easier to carry out the
electrical safety test during commissioning and after any service
work.
For hard-wired dishwashers, connection should be made via a suit-
able mains switch with all-pole isolation, which in the off position en-
sures a 3 mm gap between all open contacts.
Both the main switch and the socket must be easily accessible after
installation.
Faulty components must only be replaced by genuine Miele ori-
ginal spare parts. Only when these parts are fitted can the safety
standards of the machine be guaranteed. If the connection cable is
faulty it must only be replaced by a Miele approved service techni-
cian to protect the user from danger.
For added safety the dishwasher should be protected with a residual
current device with a trip current of 30 mA.
Equipotential bonding should be carried out if required. The screw
connection point for equipotential bonding is located at the back of
the dishwasher.