Canon G1020 Serie Guía De Inicio página 6

Setting Up the Printer
9
Close the top cover.
10
Press the OK button.
•
The ON lamp flashes and the ink system preparation
starts. It takes about 5 minutes to complete.
Proceed to the next page.
4
Flashing
Count the number of flashes.
•
9 times
Protective material remaining.
•
4 times
Print heads are not installed correctly.
•
5 times
Print heads cannot be recognized.
•
The ON lamp and Alarm lamp flash alternately 8
times
Ink system preparation was not completed successfully.
Press the ON button to restart the printer, and then see "5.
Pouring Ink" on page 3.
For all other cases, refer to the Online Manual.
If the Alarm lamp flashes or lights
"2. Removing Packing Materials" on page 1
"3. Installing the Print Heads" on page 1
"3. Installing the Print Heads" on page 1