Parts And Features; Intended Use - Craftsman BOLT ON 34980 Manual Del Operador

PARTS AND feATUReS

1. Oscillating tool attachment
2. Accessory clamping lever
3. Accessory holder
4. Sanding platen
5. Sand sheets
3
2
AcceSSORIeS
• Other oscillating tool accessories are available for a wide arrange of applications including
scraping, drywall cutting, grout removal, thin set removal, and more. Please visit
www.craftsman.com for more details.

INTeNDeD USe

DeTAIl SANDING
Sanding in extremely tight and difficult to reach areas that would otherwise require hand sanding.
Always use a high oscillating frequency for detail sanding. Sand with continuous motion and light
pressure. Applying excessive pressure does not increase material removal; but will prematurely wear
sanding sheets.
flUSH cUTTING
Remove excess wood from door jamb, window sill and/or toe kick. Removing excess copper or PVC pipe.
ReMOVAl WORK
Carpets & backing, old tile adhesives, caulking on masonry, wood and other surfaces.
ReMOVAl Of exceSS MATeRIAlS
Tile grout, plaster, mortar splatters, concrete on tiles, sills.
PRePARATION Of SURfAceS
New floors and tiles.
OPeRATING INSTRUcTIONS
WARNING:
Shock hazard. Under no circumstances should this product be used near water.
WARNING:
Risk of lacerations or burns. Do not touch work piece or accessory immediately
after operating the tool. They can become very hot. Handle carefully. Always allow accessories and
work piece to cool before handling.
WARNING:
To reduce the risk of injury, turn off and remove battery from tool or disconnect
plug from power source before making any adjustments or removing or installing attachments or
accessories. Remove any accessory from the attachment before removing or installing the attachment.
NOTe: This attachment only operates in the forward direction, the forward/reverse slider of the
Power Unit should not be able to be switched to reverse.
IMPORTANT: Refer to Power Unit instruction manual before operating this tool for all safety warnings
and details on installing and removing attachments.
6. Plunge cut blade
7. Adapter plate
8. Bolt and top plate
9. Hex wrench
4
1
5
5
6
8
9
7