Publicidad
Idiomas disponibles
Idiomas disponibles
We appreciate the confidence you have shown in JBC by purchasing this
thermoregulated soldering station. It has been manufactured with the highest
standards of quality to ensure reliable service. Before starting up the apparatus,
we suggest you to read through the following instructions carefully.
FEATURES
Stations composition
SL 2300 230V:
SL 2300 120V:
-
Analogue Control Unit and 40W
soldering iron
-
Long-Life Tip R-10D:
-
Soldering iron stand US 1000: Ref. 0290100
-
Instrucctions manual:
Technical data
-
Solid-state, electronic temperature control,
with zero-point thyristor triggering.
-
Temperature range:
-
Time for 300°C:
-
Weight without cable:
-
Power reserve:
-
This station does not include a low-voltage
transformer.
Ref. 2300200
Ref. 2300100
Ref. 0300905
Ref. 0395470
100...400°C ±10%
40 s
50 g
200 W
Soldering
cable outlet
TEMPERATURE CONTROL
The tip temperature is selected by placing the
control according to the graduated scale.
Wait for the pilot light to flash regularly, meaning
that the pre-set temperature has been reached.
The soldering iron has a large power reserve
allowing rapid temperature recovery while being
used.
RECOMMENDATIONS FOR SOLDERING
-
The components and the circuit should be
cleaned and degreased.
-
Preferably select a temperature below 375°C.
Excess temperature may cause the printed
circuit tracks to break loose.
-
The tip must be well tinned for good heat
conduction. If it has been inoperative for any
length of time, it should be retinned.
1
ENGLISH
Temperature
selector
Publicidad
