Nilfisk ALTO NEPTUNE 2 Instrucción Breve página 5

This document
This document contains the safety information
relevant for the appliance along with a quick
start guide.
Prior to using the appliance for the fi rst
time, be sure to read this document
through and keep it ready to hand.
Further support
Detailed information on the appliance can
be found in the operating instructions, which
you can download from our web site at
www.nilfi sk-alto.com.
For further queries, please contact the Nilfi sk
service representative responsible for your
country. See reverse of this document.
Important safety instructions
the appliance must
only be used by persons, who have been
instructed in its correct usage and explicitly
commissioned with the task of operating it
only be operated under supervision
not be used by children
High pressure hoses and couplings are
safety relevant. Only use parts recommend-
ed by the manufacturer
Oil- or gas heated machines must be
placed in well ventilated areas
Purpose and intended use
This high pressure washer has been designed
for professional use in:
- Agriculture, industry, transport industry,
automotive cleaning, municipal facilities,
cleaning trade, construction industry, food
industry etc.
Any other use is considered as improper use.
The manufacturer accepts no liability for any
damage resulting from such use. The risk for
such use is borne solely by the user. Proper
use also includes proper operation, servicing
and repairs as specifi ed by the manu facturer.
See operating instructions.
General
Use of the high pressure cleaner is subject to
the applicable local regulations.
Besides the operating instructions and the bind-
ing accident prevention regulations valid in the
country of use, observe recognised regulations
for safety and proper use.
Transport
1. For safe transport in and on vechicles
we recommend to prevent the equipment
from sliding and tilting by fi xing it with belts
2. Transport (when tilted):
- Unplug the machine before tilting it.
- Do not tilt the machine on the front.
3. When transported at or below 0°C, pour
anti-freeze into the water boiling tank and
suck up anti-freeze through the pump
beforehand.
Storage
Store the appliance in a dry place, protect-
ed from frost.
NEVER START-UP A FROZEN MACHINE.
Frost damages are not covered by the
guarantee!
Before use
Before starting up your machine, please check
it carefully for any defects. If you fi nd any, do
not start up your machine. Contact your Nilfi sk
distributor.
Especially check:
High pressure hose and spraying pistol.
The insulation of the electric cable should
be faultless and without any cracks. If the
electric cable is damaged, an authorized
Nilfi sk distributor should replace it.
Water connection
1. Never operate the cleaner without water.
Even brief shortages of water result in
severe damage to the pump seals.
2. To connect the appliance use a textile-
reinforced water hose with a nominal
diameter of min. 3/4" (19mm).
3. Observe required water quantity and
water pressure.
4. In the case of poor water quality (sand,
etc.) add a water fi lter to the machine.
5. Rinse the water supply hose briefl y in or-
der to prevent sand and other dirt particles
entering into the machine.
Mains power connection
The following should be observed when
connecting the high pressure washer to the
electric installation:
Only connect the machine to an installation
with earth connection.
The electric installation shall be made by a
5