Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
cod. 54112 - mod. TB1200
use tools with faulty switches. Any faults to the machine and/or to individual parts must
be expertly repaired by Specialised Technicians.
•
Original spare parts . Use original spares only.
Failure to observe these instructions can cause: failures, poor operation or
accidents.
* Do not remove the protective devices. To ensure protection while you work, do not remove
the protective devices and the screws from their original positions, and, in particular, never
work without the tool's protective shield.
* Make replacements with care. The wire cutting blade zone, under the protective shield, is
very dangerous. After fitting a new wire reel, resume a normal work position before switching
on the edge cutter again.
* Danger of moving parts. Do not touch the machine's moving parts or its accessories, unless
you have unplugged the machine's power cable from the electric mains.
* Protection against electric shocks. While using the appliance, avoid contact with objects
placed on the ground, such as pipes, thermosiphons, ovens and other household electrical
goods with a power cable, and wear shoes with insulating, dry soles.
Do not cut wet grass. Therefore, do not use the edge cutter in the rain
* Consider maximum acoustic pressure (noise). Wear a protective head-set to safeguard
you against the machine's noise during work, if the noise exceed 85 dB(A).
* Avoid impact. Do not press the head against the ground while using the machine, to
avoid braking motor rotation. Never strike the head on hard ground with too much force,
because you could unbalance the motor shaft.
4. DESCRIPTION OF THE MACHINE
1. Motor
2. Cord retainer
3. Belt
4. Front handle
5. Grass deflector
6. Dual line
- 20 -
Publicidad
Tabla de contenido
