Home Decorators Collection 51556 Guía De Uso Y Cuidado página 7

Assembly - Standard Ceiling Mount
1
Preparing for mounting
□
Remove the canopy bottom cover (J) from the canopy (C) by
turning the bottom cover counterclockwise until it unlocks.
□
Loosen the two canopy screws (EE) located in the
bottom of the mounting bracket, and turn the canopy
counterclockwise to remove the mounting bracket (A) from
the canopy (C).
3
Assembling the fan
CAUTION: To ensure wobble-free operation and to avoid
damage to the fan, the downrod (B) and the setscrew
(FF) must be completely tightened
NOTE: This fan is equipped with a safety tab (HH). Should
the setscrew (FF) ever become loose while the fan is
running in reverse, the safety tab (HH) will engage and
stop the fan from falling.
□
Loosen, but do not remove, the setscrew (FF) on the collar (K) on
top of the fan-motor assembly (E).
□
Install the downrod (B) by inserting it into the motor collar (K),
and turning it clockwise until it is tight.
□
Re-tighten the setscrew (FF) on the collar (K) on top of the fa
motor assembly (E).
2
A
EE
C
J
7
Routing the wires
□
Route the wires exiting the top of the fan-motor
assembly (E) through the center of the canopy bottom
cover (J).
□
Insert the ball/downrod (B) through the canopy (C) and
slide the decorative motor collar cover (D) onto the end
of the ball/downrod (B). Make sure the slots on the
canopy (C) are on top.
□
Route the wires exiting the top of the fan motor
assembly (E) through the downrod as shown.
FF
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
C
J
D
B
E
B
K
HH
E