Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Top/Bottom
Track Insert
Top/Bottom Track
Insert (Installed)
9. Install the Track Inserts
Slide the top/bottom track inserts into the top and bottom tracks.
10. Install the Corner Brackets and Bumpers
NOTE: The bumpers for the top corner and bottom corner brackets are not identical. The bumpers for the
top tracks are marked "T." The bumpers for the bottom tracks are marked "B."
NOTE: Perform the procedures below from inside the shower.
Slide the top corner bracket into each opening of the top track.
Place the bumpers marked "T" into the top track and align the holes of the bumpers with the holes
in the top track.
Attach the corner bracket and bumpers to the top tracks with two #8-18 x 1-1/8" screws.
Tighten the screws with a screwdriver. Do not overtighten.
Repeat this procedure for the bottom track using the bumpers marked "B."
Sterling
Bottom Track
Bottom Track
9
#8-18 x 1-1/8" Screw
Top Track
#8-18 x 1-1/8" Screw
Top Track
Bottom Track
#8-18 x 3/4"
Screw
Bottom
Insert
Track
Corner
Bracket
Insert
Top Corner
Bumper
#8-18 x 3/4" Screw
Bottom Corner
Bumper
Bottom
Corner
Bracket
1034044-2-B
Publicidad
Tabla de contenido
