Hunter Spa Select 90050 Manual De Instrucciones página 10

B9
B8
D
C
B
Pop out the first wiring access slug. Use second if needed. Insert the strain relief into the housing and secure
with the washer.
B11
B10
D
Move the housing into position above the ceiling. Pull the wires through the strain relief and tighten the
strain relief screws.
B12 B13
D
Attach existing ducting to duct connector. Tape joints.
Fit housing into the opening and secure by tightening the
If ducting does not fit securely,
pre-loaded screws into the joist.
an adapter may need to be purchased.
Note: Install the box flush with the sheetrock (ceiling).
41717-01 05/31/2006
10
41717-EngS_05.31.06.indd 10 5/31/06 3:53:32 PM