Front Glass Installation
1. Pour and evenly distribute the
supplied media in the Media tray
of the firebox (Figure 11).
2. Carefully mount front glass
assembly so that the front
glass hooks hang on the front
glass mounts on the fireplace
(Figure 11).
3. Use the supplied two Phillips
sheet metal screws to fasten
the glass assembly tabs to the
fireplace (Figure 12).
4. If unit is not hard-wired, plug
fireplace into a 15 Amp, 120 Volt
outlet (refer to NOTE 1).
Figure 11
Front glass
assembly
Hooks (4)
Mounts (4)
Figure 12
Front tray
Tab
15