Pairing/Deleting Accessory; Pairing New Remote Control And Sensor; Pairing New Wireless Siren; Deleting Sensors And Remote Controls - Smanos L020 Manual Del Usuario

Sistema de alarma de seguridad

Ocultar thumbs Ver también para L020:

Tabla de contenido

Idiomas disponibles

Pairing/Deleting Accessory

The included accessories have been paired with the control panel

by default, if you want to pair new accessories, please follow these

instructions:

Tap

[+]

on the accessory interface to send out pairing signal, and

then trigger the accessory by following the illustration.

Important: Please don't trigger the tamper switch of sensor when

pairing, otherwise the system will recognize the sensor as a 24-hour

zone sensor.

When a beep is heard from the control panel means the sensor

is paired successfully. If two beeps are heard, it means the sensor

has already been paired.

Note:

Wireless siren is sold separately.

1. Siren enters pairing state (please refer to its user manual).

2. Arm or disarm the control panel on App to send out pairing

When a beep is heard from the siren means the siren is paired

successfully. If two beeps are heard means the siren has already

been paired.

Press any button on the

remote control

Use the supplied reset pin to press the reset button for about

3 seconds, the control panel will beep once to indicate all the

sensors and remote controls have been deleted.

Press the test button

more than twice(Purchase

separately)

Press and hold the pair button of the wireless siren, the deletion

Separate the transmitter

is succeeded when one beep is heard from the wireless siren.

and the magnet

To pair other sensors, please refer to the related user manuals.

signal to the siren.

Tabla de Contenido

Tabla de contenido