Glass Shade; Decorative Frame - HAMPTON BAY 52129 Guía De Uso Y Cuidado

Assembly - Attaching the Light
2
Installing the bulbs and glass shade
CAUTION: Do not overtighten when installing the glass
shade into the light kit. Allow the glass shade to cool
completely before removing.
□
With power off, install the light bulbs (I) by screwing them into
the light bulb sockets.
□
Place the glass shade (J) into the light kit pan (H), aligning
the three flat areas on the top of the flange of the glass
shade (J) with the three raised dimples in the light kit pan
(H). Turn the glass shade clockwise until it stops.
3
Attaching the decorative frame
□
Remove one screw (MM) from the light kit pan (H), and
loosen, but do not remove the other two screws.
□
Push the decorative frame (K) up to the light kit pan (H)
so that the two loosened screw heads fit into the keyhole
slots. Turn the decorative frame (K)clockwise to secure.
□
Re-install the screw (MM) that was removed from the light
kit pan (H).
□
Make sure all the screws are firmly tightened.
□
Attach the pull chain extensions (EE) provided to the light pull
chain and fan pull chain.
H
I
J
H
EE
MM
12
K