Simons Voss Technologies Z4.PL Folleto De Instrucciones página 19

SimonsVoss Technologies GmbH
3. Remove battery/installation key from the knob.
4. Push recessed grip ring backwards towards the pad-
lock, so that it comes away from the thumb-turn.
5. Hold recessed grip ring, turn knob about 10° in an
anti-clockwise direction and remove.
6. Carefully remove both batteries from the holder.
7. Insert the new batteries into the holder at the same
time with the positive poles next to each other;
change the batteries as quickly as possible. Use
clean gloves free of fat or grease to handle new bat-
teries.
8. Replace the knob (align the triangle marks as in the
diagram) and turn about 10° in a clockwise direction.
9. Push recessed grip ring back onto the knob, so that
the knob and ring close together in a flush fit.
10. Place the installation/battery key on the knob in such
a way that its two teeth lock into the openings in the
locking disc; If necessary, turn the knob until both
teeth engage into the knob.
11. Lock the knob into place again by turning it about
30° in an anti-clockwise direction (until you hear a
click).
Recessed grip ring
Batteries
Inside Knob
Markings
19